Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Olympia Chimney Chimney Cleaning & Sweep in Framingham: What to Know First
Olympia Chimney chimney cleaning and sweep in Framingham typically runs $189 to $259 for a standard annual sweep with a Level 1 inspection, and we book most jobs within five to seven business days during the fall rush. We’re an independent Olympia Chimney service provider, which means we fix what’s in front of us without a manufacturer’s script, and the price you hear on the phone is the price on the invoice. If you own an Olympia Chimney liner or cap system in Framingham and haven’t had the flue looked at in a while, call (781) 390-9211 and Wendell or one of the crew will walk you through what you actually need.
How Olympia Chimney Products Fail - and How We Fix Them
Your flue doesn’t care how the fire looks. It cares how it breathes. We’ve swept enough Olympia Chimney systems in Framingham to know where they tend to struggle, and it’s rarely where the marketing brochure points.
- Olympia Chimney stainless steel liners with corrugated inner walls collect creosote faster than smooth-wall liners. We see this constantly in Framingham homes with older wood stoves. The ridges give soot and tar a place to grab. A standard brush pass handles first-degree creosote, but if it’s glazed, we’ll show you the camera footage before recommending a more aggressive treatment.
- Olympia Chimney caps with galvanized mesh screens clog with ash and restrict draft. In the Nobscot neighborhood especially, we find screen mesh packed tight with fine ash from pellet and wood stoves. The symptom is smoke backing up into the room even though the flue itself is relatively clean. We pull the cap, clean or replace the mesh, and the draft comes back.
- Terracotta flue tiles joined with mortar that erodes under Framingham’s freeze-thaw cycles. Older Olympia Chimney masonry systems in Framingham take a beating from New England winters. Water gets into hairline cracks, freezes, expands, and the joint loosens. During a Level 2 inspection we’ll run the camera up and show you exactly which joints are failing before we talk about a fix.
- Improperly sized Olympia Chimney liners with diameter mismatches at the appliance connection. A liner too big for the stove never gets hot enough to move smoke efficiently, leaving creosote buildup in the lower third of the flue. We check the appliance output against the liner diameter on every sweep and tell you plainly if the match is off.
- Storm-collared flashings at the roof line that loosen after a few Framingham winters. Water follows the gap and saturates the masonry around the liner. By the time you see a stain on the ceiling, the flashing has been leaking for months. We reseal and cinch collars during routine sweeps when we’re already on the roof.
Our Olympia Chimney Chimney Cleaning & Sweep Process
- 1
Call and talk to a person. You call (781) 390-9211, Wendell or one of the crew answers, and you tell us what you’re seeing. We give you a firm price before we hang up, not a “we’ll see when we get there.”
- 2
Arrive in a real window. We show up in a Top Hat Chimney truck, in uniform, background-checked, and we call if traffic or the last job runs long.
- 3
Level 1 or Level 2 inspection first. We run the chimney camera before we put a brush to anything, so we know what’s coming out and what’s staying. The footage is yours to keep, and we’ll walk you through it plain-English.
- 4
Sweep and document. We use brushes sized for your Olympia Chimney liner or masonry flue, clean the cap and check the mesh, and clear the smoke shelf and damper. You’ll see before-and-after photos.
- 5
Straight verdict on parts. If something needs a part, we’ll tell you if OEM Olympia Chimney makes sense or if a quality aftermarket piece does the same job for less. We don’t push parts you don’t need. If it doesn’t need doing, we’ll tell you.
- 6
Test and guarantee. We do a draft check and a visual re-inspection before we leave. Every job carries the 90-Day Done Right Promise in writing - if it’s not right, one call brings us back at no charge.
What Olympia Chimney Chimney Cleaning & Sweep Costs in Framingham
| Service | Typical Framingham Price |
|---|---|
| Annual chimney sweep + Level 1 inspection | $189 - $259 |
| Annual sweep + Level 2 camera inspection | $289 - $359 |
| Creosote removal (glazed, treatment required) | $350 - $600 depending on severity |
| Cap replacement (Olympia Chimney OEM or equivalent) | $195 - $425 installed |
| Liner inspection with camera only (no sweep) | $149 - $199 |
What moves the price: roof height and pitch, liner condition, how long since the last sweep, and whether the cap or flashing needs attention while we’re up there. No trip charge inside our service county, and we take $40 off any repair over $200. Call (781) 390-9211 for a free estimate - the number we quote is the number you pay.
Why Framingham Homeowners Call Top Hat Chimney for Olympia Chimney Work
Top Hat Chimney has been cleaning and repairing chimneys in Framingham since 1999, and we’re still owned and operated by the same person who started it - Wendell Pike. We publish our license number and our address, and you’ll run into us at the hardware store on Saturday. The 90-Day Done Right Promise is stamped on every job, not buried in fine print. We work on Olympia Chimney systems all the time, and we also service DuraFlex, HeatShield, and Gelco products, so if a manufacturer’s liner isn’t the right call for your house, we’ll tell you what is. That’s the whole point of being independent.
FAQs
No. We’re an independent Olympia Chimney service provider, and using OEM Olympia Chimney parts or quality aftermarket equivalents doesn’t void a manufacturer’s warranty when the work is done correctly. We’ll document every part we install and provide photos so you have a clear service record.
Once a year, burn or no burn. Chimneys break in the off-season too. If you burn more than three cords a season or burn green wood, you may need a mid-season sweep, especially with corrugated Olympia Chimney stainless liners that collect creosote faster than smooth-wall systems.
First-degree creosote is a brush job - it’s flaky and dull black and comes out with a standard sweep. Third-degree is a glaze - it’s shiny, hard, and baked onto the liner wall, and it usually means the liner has been running too cool or the wood was wet. We’ll show you the camera footage and tell you exactly which one you’ve got before recommending anything.
Yes. We service Olympia Chimney installations regardless of who did the original work. The flue doesn’t know who installed it, and we don’t need the original installer’s blessing to diagnose and clean it properly.
Written by Wendell Pike, Owner at Top Hat Chimney, serving Framingham and nearby areas.





Before
After
Before
After
Before
After